ZJ-CY133 Upholstered Leisure Armchair

ZJ-CY133 Upholstered Leisure Armchair for Cafés

01. 产品概述 / Product Overview

ZJ-CY133休闲椅是一款将金属框架的简洁线条与软包座椅的舒适体验相结合的商业空间座椅。产品采用开放式铁艺扶手结构，搭配圆角软包靠背及独立厚实坐垫，整体造型轻巧、轮廓饱满，在视觉上兼顾现代设计感与空间亲和力。暖黄色软包与同色系金属框架形成统一的色彩语言，可为空间增添活力，适合追求设计辨识度与日常实用性的商业餐饮环境。

The ZJ-CY133 Upholstered Leisure Armchair combines the clean lines of a metal frame with the comfort of upholstered seating. Its open armrest structure, softly rounded backrest, and generously padded seat create a distinctive balance between visual lightness and a welcoming silhouette. The warm yellow upholstery coordinates with the matching metal frame, bringing a lively yet cohesive appearance to contemporary commercial interiors. Designed with both aesthetics and everyday practicality in mind, the chair suits hospitality and dining spaces where seating contributes to the overall customer experience.

相较于强调装饰效果的传统休闲座椅，ZJ-CY133更加关注空间适配、坐姿支撑和日常维护之间的平衡。扶手与椅腿通过连续的圆管线条形成具有辨识度的结构语言，坐垫下方保留开放空间，使产品不会在视觉上显得过于厚重。圆润的靠背轮廓也让座椅能够自然融入现代餐厅、咖啡厅、休闲接待区以及开放式交流空间。

Rather than relying on elaborate decorative elements, the ZJ-CY133 focuses on the relationship between comfort, spatial compatibility, and practical maintenance. Smooth tubular lines connect the armrests and legs, creating a recognizable design identity, while the open space beneath the seat reduces visual bulk. The rounded backrest further softens the chair's appearance, allowing it to integrate naturally into modern restaurants, cafés, reception lounges, and informal meeting areas.

02. 产品参数 / Product Specifications

尺寸说明： 产品整体宽度600mm，前后深度720mm，总高度780mm，座面参考高度450mm。尺寸以所提供的产品图及规格为依据。批量采购或特殊空间配套时，建议在生产前核对正式尺寸图与实物样品。

Dimension Notes: The chair measures 600 mm in overall width, 720 mm in depth, and 780 mm in height, with a specified seat height of 450 mm. These measurements are based on the supplied product drawing and specifications. For bulk orders or projects with precise space requirements, final dimensions should be confirmed against approved production drawings and samples.

03. 材质详情 / Materials & Construction

3.1 铁艺框架与Ø25mm圆管

ZJ-CY133采用铁艺结构作为主体支撑，扶手与椅腿以Ø25mm圆管构成清晰、流畅的框架轮廓。圆管造型减少了外露尖锐棱角，使扶手触感与外观更加柔和。金属结构为座椅提供明确的承托基础，同时通过较为开放的框架设计，保留软包座椅应有的轻盈感。在商业项目采购中，管材连接、焊接质量、框架尺寸及整体平整度均是需要重点确认的制造指标。

Metal Frame and Ø25 mm Round Tubing

The ZJ-CY133 uses a metal supporting structure formed with Ø25 mm round steel tubing. The tubular armrests and legs create a smooth, continuous-looking outline while reducing exposed sharp edges. This construction provides a defined support framework without making the upholstered chair appear visually heavy. For commercial procurement, particular attention should be given to joint integrity, welding consistency, dimensional accuracy, and overall frame alignment during manufacturing and inspection.

3.2 KFC专用欧卓皮革软包

座椅软包选用客户指定规格的KFC专用欧卓皮革，用于靠背和坐垫表面覆盖。皮革软包能够呈现细腻、完整的视觉效果，适用于重视清洁便利与空间形象统一的餐饮场所。日常使用中，可根据面料供应商提供的养护要求进行表面清洁，减少污渍残留。不同颜色、纹理及实际耐磨表现应以选定的材料样本、产品技术资料和相关检测结果为准。

Ouzhuo Leather Upholstery (KFC-Spec Material)

The upholstered backrest and seat use the specified Ouzhuo leather material, identified in the supplied specification as KFC-spec leather. This covering provides a refined, continuous surface suitable for dining environments where appearance and cleaning convenience are important. Routine surface care should follow the upholstery supplier's instructions to minimize the accumulation of spills and stains. Available textures, colors, and wear-resistance performance should be verified through approved material samples, technical documentation, and applicable testing records.

3.3 45#高密度回弹海绵

坐垫与靠背采用45#高密度回弹海绵填充，通过柔软表层与内部支撑相结合的方式，改善日常就座体验。较为饱满的坐垫轮廓增加了座面与人体的接触面积，有助于分散局部坐姿压力。海绵的选用不仅关系到初次就座的软硬感，也影响后续使用中的支撑表现，因此，在商业项目定制时，应结合实际样品确认海绵硬度、回弹感及成品坐感。

45# High-Density Resilient Foam

The seat and backrest incorporate 45# high-density resilient foam to provide a combination of cushioning and underlying support. The generously shaped seat cushion offers a broad contact area, helping distribute seated pressure more comfortably. Foam selection affects not only the initial sitting experience but also how the seat responds to repeated use. For commercial projects, foam firmness, resilience, and finished seating comfort should be evaluated using an approved physical sample.

3.4 静电喷涂表面工艺

金属框架使用静电喷涂工艺进行表面处理。该工艺通过静电作用使粉末涂料附着于经过前处理的金属表面，再经固化形成涂层。与单纯追求外观颜色不同，商业家具的涂装还需要关注涂层覆盖、边缘处理、色泽一致性及附着性能。ZJ-CY133图示采用黄色涂装，与软包颜色呼应，使扶手、椅腿与座垫形成协调的整体外观。

Electrostatic Powder-Coated Finish

The metal frame is finished using an electrostatic powder-coating process. Powder particles are electrically deposited onto a properly prepared metal surface and subsequently cured to create a finished coating. For commercial furniture, coating consistency, edge coverage, color uniformity, and adhesion are important inspection considerations. The yellow finish shown on the ZJ-CY133 complements its upholstery, creating a consistent appearance across the armrests, legs, and padded seating components.

3.5 圆角靠背与独立坐垫

宽阔的软包靠背采用圆角过渡设计，减少了硬朗框架带来的视觉距离感。背垫与座垫在造型上相互独立，形成清晰的层次关系，避免整个座椅显得臃肿。扶手位置与座面高度相互协调，方便用户在就座、交谈及起身时获得手臂支撑。这种组合更适合需要兼顾舒适感、视觉识别及座位布置灵活性的室内空间。

Rounded Backrest and Distinct Seat Cushion

The upholstered backrest features rounded corners that soften the appearance of the surrounding metal structure. Visually distinct back and seat cushions create separation and depth, helping maintain a balanced silhouette. The armrests are positioned in relation to the seat to provide an accessible resting point for the arms during sitting, conversation, and standing up. This arrangement is particularly suitable for interiors that require a balance of seating comfort, design character, and flexible furniture placement.

04. 产品设计亮点 / Design Highlights

4.1 金属与软包的视觉平衡

ZJ-CY133并未采用复杂的装饰性结构，而是通过圆管框架、厚实软包与统一配色塑造产品特点。金属部分赋予产品鲜明的结构线条，软包部分则弱化视觉上的坚硬感，适合与木纹桌面、石材台面及现代室内饰面搭配。

Balanced Metal and Upholstery Design

Rather than introducing unnecessary decorative details, the ZJ-CY133 establishes its identity through tubular framing, substantial upholstery, and coordinated colors. The metal components define the chair's structure, while the padded surfaces create a softer visual impression. This combination pairs naturally with wood-grain dining tables, stone tabletops, and modern interior finishes.

4.2 开放式框架

扶手下方采用开放式设计，没有大面积封闭板件，使座椅保持相对通透的空间感。对于需要组合多组座位的餐厅或咖啡厅，这种造型能够降低家具排列时的视觉密集程度。但实际通行宽度和桌椅间距仍应结合门店平面图合理规划。

Open-Frame Configuration

The open areas beneath the armrests eliminate the need for large enclosing panels, maintaining a relatively airy visual profile. In restaurants and cafés with multiple seating groups, this approach can reduce the appearance of overcrowding. Actual circulation clearances and table-to-chair spacing should still be determined according to the project's floor plan.

4.3 圆润且具有辨识度的轮廓

从靠背顶部的弧线到扶手的弯管过渡，再到前方软包坐垫的圆角处理，产品强调连续、柔和的轮廓。整体造型既可作为餐饮空间中的常规座椅，也适合作为局部特色家具，提升特定区域的设计识别度。

Soft, Recognizable Silhouette

From the curved upper edge of the backrest to the bent tubular armrests and rounded front seat cushion, the chair follows a consistent design language. Its silhouette works as part of a coordinated seating arrangement or as an accent piece in selected areas where visual identity matters.

4.4 满足项目化配套需求

对于商业家具采购而言，单件产品的外观并不是唯一考虑因素。颜色协调、尺寸匹配、坐感一致性以及后期补货的可衔接性同样重要。ZJ-CY133可围绕确认后的样品及生产规格组织批量供应，使餐厅、咖啡厅及品牌连锁空间在配置座椅时具有明确的产品标准。

Designed for Project-Based Supply

In commercial furniture procurement, appearance is only one part of the purchasing decision. Color coordination, dimensional compatibility, seating consistency, and the ability to match future replacement orders also matter. The ZJ-CY133 can be supplied according to approved samples and production specifications, providing a defined furniture reference for restaurants, cafés, and branded hospitality projects.

05. 人体工学与舒适体验 / Ergonomics & Seating Comfort

5.1 450mm座高

ZJ-CY133座面高度约450mm，是配置餐饮桌椅时的重要参考尺寸。座椅的实际使用体验不仅由座高决定，还与餐桌高度、坐垫压缩量、扶手位置及使用者的身体尺寸相关。因此，正式配置餐桌时，建议提前检查椅子能否顺利进入桌下，以及扶手与桌边是否存在干涉。

450 mm Seat Height

The ZJ-CY133 has a specified seat height of approximately 450 mm, an important reference when planning dining furniture arrangements. Actual seating comfort also depends on table height, cushion compression, armrest position, and individual body dimensions. Before pairing the chair with dining tables, buyers should verify table clearance and ensure that the armrests do not interfere with the tabletop.

5.2 软硬结合的坐感

座椅采用软包坐垫与金属支撑框架相结合的结构，让接触身体的部分保持柔软，同时使承托结构相对清晰。靠背的弧形设计更重视自然倚靠时的接触感，适用于用餐、会客或短时休闲等活动。具体舒适程度存在个体差异，建议以实际试坐结果作为批量选型依据。

A Balance of Cushioning and Support

The chair combines upholstered contact surfaces with a metal supporting structure, keeping the areas that touch the body cushioned while maintaining a defined frame. The curved backrest provides a broad upholstered surface for relaxed seating during dining, conversation, or informal breaks. Since comfort preferences vary, physical seating trials are recommended before finalizing large-volume purchases.

06. 适用场景 / Recommended Applications

6.1 咖啡厅与烘焙空间

对于咖啡厅、烘焙店及轻餐饮空间，座椅往往直接参与门店视觉风格的塑造。ZJ-CY133的暖黄色外观适合搭配浅木色、白色、灰色或中性色装饰材料，可应用于双人桌、休闲交流区以及靠窗座位。开放式扶手造型也有助于保持空间整体的轻松氛围。

Cafés and Bakeries

In cafés, bakeries, and casual dining spaces, seating plays an important role in defining the atmosphere. The warm yellow ZJ-CY133 can be paired with light wood, white, gray, and neutral interior materials. Suitable placements include two-person tables, informal conversation areas, and window-side seating arrangements. Its open armrest design supports a relaxed and approachable visual style.

6.2 商业餐厅与休闲餐饮门店

在现代休闲餐厅、主题餐厅以及部分品牌连锁门店中，具有软包结构的扶手椅可用于提升特定座位区域的体验。ZJ-CY133适合用于舒适度要求较高的散台、等候区或特色用餐区。批量配置时，需要结合实际营业面积、通道要求与清洁频率判断是否适合全店使用。

Restaurants and Casual Dining Venues

In contemporary restaurants, themed dining concepts, and selected chain-store interiors, upholstered armchairs can help distinguish comfort-focused seating areas. The ZJ-CY133 may be used at individual dining tables, waiting areas, or designated feature seating zones. For larger installations, buyers should consider floor area, circulation requirements, and cleaning frequency before selecting it for general dining use.

6.3 酒店与商业接待空间

除了餐饮场景，该产品也适用于酒店休息区、商业接待室、展厅交流区及公共休闲区域。金属框架与软包结合的外观，在正式与轻松之间形成适度平衡，可以作为具有统一设计主题的配套座椅使用。

Hotels and Commercial Reception Areas

Beyond restaurants, the chair can be considered for hotel lounges, commercial reception rooms, showroom conversation areas, and indoor relaxation spaces. Its combination of metal framing and upholstery creates a balance between professional presentation and informal comfort, making it suitable for coordinated interior furniture schemes.

6.4 品牌连锁及商业项目

连锁门店的家具采购通常需要兼顾不同门店的装修风格、产品尺寸与后期维护。通过统一样品、颜色编码、材料规格及订单记录，ZJ-CY133可以纳入标准化家具配置方案，方便采购方进行后续复购与门店形象管理。

Chain Stores and Commercial Projects

Chain-store furniture procurement often involves matching furniture specifications across different interior layouts while maintaining consistency in appearance and maintenance requirements. By standardizing approved samples, color references, material specifications, and order records, the ZJ-CY133 can become part of a repeatable furniture selection program for future orders and store development.

07. 可定制范围 / Customization Options

ZJ-CY133可根据实际项目需求评估不同的外观配置，包括软包颜色、面料纹理、金属框架颜色及项目标识要求。对于品牌餐厅，可参考门店VI配色、墙面材质及餐桌设计确定座椅的最终组合方案。涉及尺寸、结构、材料替换或特殊工艺的调整，需要经过设计评估与样品确认，以避免影响产品的承托关系和实际使用体验。

The ZJ-CY133 can be evaluated for project-specific appearance options, including upholstery colors, surface textures, metal-frame finishes, and identification requirements. For branded restaurants, final selections may be coordinated with corporate colors, wall finishes, and dining table designs. Changes involving dimensions, structural details, materials, or special manufacturing processes require technical review and sample approval to preserve the intended support characteristics and seating performance.

批量定制建议遵循“先确认材料、再确认样品、最后组织生产”的流程。采购方可以通过实物色卡确认软包与金属件的色差，通过打样核对座椅比例、坐垫软硬度、框架表面效果及实际组合空间。在不同批次追加订单时，建议沿用已确认的材料编码与样品记录，降低颜色及外观偏差的风险。

For customized bulk orders, a practical approach is to approve materials first, verify a physical sample, and then authorize production. Material swatches help confirm the relationship between upholstery and metal colors, while prototype evaluation allows buyers to check proportions, cushioning firmness, frame finish, and installation suitability. For repeat orders, retaining approved material codes and reference samples can reduce the risk of unwanted visual differences between production batches.

08. 生产质量与细节控制 / Production Quality & Detail Control

商业座椅的质量管理应覆盖金属加工、框架连接、涂装、软包制作和成品组装等环节。对于ZJ-CY133，重点检查内容包括Ø25mm管材尺寸一致性、焊接部位外观、扶手左右对称性、金属框架的平整度、涂层状态、海绵填充均匀性以及皮革包覆质量。这些项目可作为批量订单生产和验收时的质量控制依据。

Quality management for commercial seating should cover metal fabrication, frame assembly, finishing, upholstery preparation, and final assembly. For the ZJ-CY133, relevant checkpoints include Ø25 mm tubing consistency, visible weld quality, armrest symmetry, frame alignment, coating condition, evenness of foam filling, and upholstery workmanship. These considerations can form part of the production and acceptance criteria for commercial orders.

针对长期投入营业的餐饮环境，建议根据项目所在地的法规及使用要求，明确必要的结构强度、稳定性、阻燃性、材料安全性和表面性能测试。具体测试项目、适用标准和合格情况，应以实际检测报告及采购合同约定为准，不能仅凭材质名称或产品外观判断其性能等级。

For furniture intended for regular use in operating hospitality venues, applicable structural strength, stability, flammability, material safety, and surface-performance requirements should be identified according to local regulations and project specifications. Test methods, compliance standards, and results must be supported by the relevant reports and purchase agreements rather than inferred from material descriptions or appearance alone.

09. 日常清洁与保养 / Cleaning & Maintenance

ZJ-CY133采用软包与喷涂金属结构组合设计，日常维护应分别针对不同材料进行。软包表面出现一般污渍时，可先使用柔软、微湿的清洁布轻轻处理，必要时使用面料供应商认可的清洁产品。应避免长时间浸水、强力摩擦以及未经确认的化学清洁剂，以减少表面变色、脱层或损伤风险。

The ZJ-CY133 combines upholstered surfaces with a powder-coated metal frame, so each material should be cleaned according to its characteristics. For ordinary surface marks, gently wipe the upholstery with a soft, slightly damp cloth and use only cleaning products approved by the material supplier when necessary. Prolonged water exposure, aggressive scrubbing, and unverified chemical cleaners should be avoided to reduce the risk of discoloration, surface damage, or material separation.

金属框架建议使用柔软清洁布定期擦拭，避免硬质清洁工具划伤涂层。门店在周期性维护时，可同步检查脚垫磨损、框架连接部位、坐垫固定状态及接触地面的稳定情况。发现异常松动或明显损坏时，应及时停止使用并安排检查处理。

The metal frame should be wiped regularly with a soft cloth to protect the coating from scratches caused by abrasive tools. Periodic maintenance checks may also include foot-cap wear, frame joints, cushion attachment, and floor contact stability. If significant damage or looseness is detected, the chair should be taken out of service until inspected and corrected.

10. 包装与运输 / Packaging & Delivery

针对国内商业项目及国际贸易订单，ZJ-CY133的包装方式可依据运输距离、订单数量和交付要求确认。包装设计重点在于减少金属框架与软包表面在装卸、堆放及运输过程中发生直接摩擦，并对扶手、椅腿、坐垫边缘等部位进行适当防护。具体是否整装包装、单箱数量、纸箱尺寸及包装材料，应以订单确认的包装方案为准。

For domestic projects and international shipments, packaging arrangements for the ZJ-CY133 can be determined according to transport distance, order volume, and delivery requirements. Packaging should minimize direct friction between metal and upholstered components during loading, storage, and transit, with suitable protection for armrests, legs, and cushion edges. Whether the chair is shipped fully assembled, the quantity per carton, carton dimensions, and protective materials should be confirmed in the approved packaging plan.

外贸批量采购可根据实际出货方案核算装柜数量及物流成本。确认订单前，建议核对外箱尺寸、毛净重、装运方式、目的地包装与标签规定，以及交货条款。对于定制产品，生产周期、打样时间和运输安排需要在正式下单前分别确认，避免因材料调整或包装变更影响项目交付。

For export orders, container loading quantities and logistics costs should be calculated using actual shipment specifications. Before order confirmation, buyers should verify carton dimensions, gross and net weights, shipping methods, destination packaging and labeling requirements, and agreed delivery terms. For customized products, sample development, production lead times, and shipping arrangements should be confirmed separately to support realistic project scheduling.

11. 三年质保与售后服务 / Three-Year Warranty & After-Sales Support

ZJ-CY133提供三年产品质保，以支持商业客户对长期使用和后期维护的需求。质保服务依据正式销售合同及适用质保条款执行。对于正常使用条件下出现的疑似材料、制造或结构质量问题，可通过订单信息、产品照片及问题描述提交售后核查，由服务人员根据实际情况确认处理方式和适用范围。

The ZJ-CY133 comes with a three-year product warranty to support commercial buyers with ongoing use and maintenance requirements. Warranty service is governed by the sales agreement and applicable warranty terms. If a potential material, manufacturing, or structural defect occurs under normal usage conditions, buyers may submit order details, product photographs, and a description of the issue for evaluation. The appropriate remedy and coverage will be determined following verification.

众京家具重视产品交付后的持续服务，提供72小时售后响应机制，帮助客户及时沟通产品质量、使用维护及配套采购问题。售后响应时间指接收并处理客户服务需求的响应安排，不等同于所有问题均能在72小时内完成维修或更换。具体维修、更换、配件供应及物流责任以合同和售后条款为准。

ZHONGJING FURNITURE provides an after-sales response mechanism within 72 hours to help commercial customers address product concerns, maintenance questions, and follow-up procurement needs. The response period refers to the handling and communication of service requests; it does not mean every repair or replacement can be completed within 72 hours. Repair arrangements, replacements, spare parts, and logistics responsibilities are subject to the agreed warranty and service conditions.

12. 质价比与采购价值 / Quality-to-Price Value

12.1 从采购价格转向综合使用成本

在商业家具采购中，质价比并不等于单纯追求低价，而是比较产品质量、使用体验、采购支出与后期维护成本之间的关系。餐饮门店通常面临持续使用、频繁清洁及家具替换等实际需求，因此，采购决策需要关注产品在整个使用周期内的综合投入，而不只是首次报价。

Value Beyond the Initial Purchase Price

For commercial furniture, quality-to-price value is not simply a matter of choosing the lowest quotation. It involves assessing product quality, user experience, initial expenditure, and future maintenance costs together. Restaurants frequently deal with repeated seating use, routine cleaning, and occasional furniture replacement, making total lifecycle expenditure more relevant than purchase price alone.

12.2 材料配置与使用需求匹配

ZJ-CY133采用Ø25mm金属圆管、45#高密度回弹海绵、欧卓皮革软包及静电喷涂表面工艺，形成明确的材料配置方案。这些材料与工艺是否具备良好的经济价值，应结合实际使用环境、材料等级、测试结果和采购价格进行综合判断。合理的产品选型不在于一味增加材料成本，而在于为使用场景选择适当的结构与配置。

Matching Material Specifications to Real Needs

The ZJ-CY133 has a defined material configuration that includes Ø25 mm steel tubing, 45# high-density resilient foam, Ouzhuo leather upholstery, and an electrostatic powder-coated finish. The economic value of these specifications should be evaluated in relation to the operating environment, actual material grades, verified performance, and quoted price. Effective product selection is about choosing suitable construction and materials rather than increasing material costs without a clear operational benefit.

12.3 批量采购与后期补货价值

对连锁餐厅和商业项目而言，统一的座椅型号有利于管理采购清单、减少重复选型，并为后续门店扩张提供明确的家具参考规格。通过固定软包颜色、框架工艺和样品标准，采购方可以更方便地比较不同批次产品。批量订单的实际成本优势仍需根据采购数量、运输方式、定制程度及生产条件具体核算。

Bulk Procurement and Repeat-Order Value

For restaurant chains and commercial developments, standardized chair models can simplify procurement records, reduce repeated product selection, and provide reference specifications for future store expansion. Consistent upholstery colors, frame finishing requirements, and approved samples also make comparisons between production batches easier. Actual cost benefits from volume purchasing depend on quantities, transportation arrangements, customization requirements, and production conditions.

12.4 三年质保的长期价值

三年质保为采购方提供了明确的售后保障期限，也是评估长期采购价值时可考虑的因素之一。相比只关注家具购买当日的价格，采购方还应审查实际保修范围、维护要求及后续配件供应条件。对长期运营的商业空间来说，产品适配度、可维护性和服务条款共同决定了更完整的质价比。

The Long-Term Value of Warranty Support

A three-year warranty provides a defined period of after-sales coverage and is one factor in assessing longer-term procurement value. Beyond the purchase price, commercial buyers should review the exact warranty scope, routine maintenance obligations, and availability of replacement components. For continuously operating hospitality spaces, suitability, maintainability, and service terms all contribute to a more complete understanding of quality-to-price value.

13. 常见问题 / Frequently Asked Questions

Q1. ZJ-CY133适合高频使用的商业餐厅吗？

ZJ-CY133面向室内商业及餐饮场景设计，适用于咖啡厅、休闲餐厅和接待区域等环境。对于高频使用或特殊公共场所，应在采购前结合实际结构测试、使用强度和当地适用标准进行评估，确认产品与项目要求匹配。

Is the ZJ-CY133 suitable for busy commercial restaurants?

The ZJ-CY133 is intended for indoor commercial and hospitality settings, including cafés, casual restaurants, and reception spaces. For intensive-use environments or facilities with additional requirements, suitability should be assessed against verified structural test results, expected usage conditions, and applicable local standards.

Q2. 产品尺寸是否包含扶手和靠背？

产品标示的600 × 720 × 780mm为整体外廓尺寸，分别对应宽度、深度与总高度，座面高度参考值为450mm。餐桌配套及项目布局时，建议另外确认扶手最高点、坐垫实际深度与桌下空间。

Do the stated dimensions include the armrests and backrest?

The specified 600 × 720 × 780 mm represents the overall width, depth, and height of the chair, with a reference seat height of 450 mm. For table matching and project planning, buyers should also confirm the maximum armrest height, usable cushion depth, and under-table clearance.

Q3. 软包颜色和金属框架颜色可以调整吗？

项目采购可提出软包及金属框架的颜色定制需求。具体可选颜色、材料供应条件、最小起订量及额外费用，需要根据色卡、样品和订单数量确认。为保证批量颜色一致性，建议在投产前保留双方认可的实物色样。

Can the upholstery and metal frame colors be changed?

Project buyers may request alternative upholstery and frame colors. Available finishes, material supply conditions, minimum order quantities, and additional costs must be confirmed based on color samples and order volume. Approved physical color references are recommended before mass production to support consistency.

Q4. KFC专用欧卓皮革是否代表KFC官方认证？

这里的“KFC专用欧卓皮革”为提供的材料规格称谓，仅用于说明软包选材，不表示该座椅获得KFC官方授权、认证或采购认可。涉及实际品牌供应关系、面料技术等级和检测认证的信息，须以合法有效的供应文件及检测资料为准。

Does KFC-spec Ouzhuo leather mean official KFC certification?

The term "KFC-spec Ouzhuo leather" reflects the supplied material designation only. It does not indicate that this chair has been authorized, certified, or approved for purchase by KFC. Any claims regarding brand supply relationships, material grades, or certification must be supported by valid supplier documentation and test records.

Q5. 批量采购前是否需要确认样品？

建议确认。尤其是用于多门店统一配置的订单，实物样品可以帮助客户核对尺寸、靠背角度、坐垫软硬度、面料颜色、扶手高度与桌椅搭配效果。正式批量生产应依据最终确认的样品和技术规格执行。

Should buyers approve a sample before placing a bulk order?

Yes, sample approval is recommended, particularly for multi-store installations. A physical sample allows buyers to check dimensions, backrest angle, cushion firmness, upholstery color, armrest height, and table compatibility. Final production should follow the agreed sample and confirmed technical specifications.

Q6. 三年质保包括哪些内容？

产品质保期限为三年。具体保障范围、材料自然损耗、非正常使用造成的损坏以及维修或更换责任，以双方确认的销售合同和质保文件为准。采购方在下单前应阅读相关条款，明确使用及保养要求。

What is included in the three-year warranty?

The product warranty period is three years. Specific coverage, natural material wear, damage caused by improper use, and repair or replacement responsibilities are defined in the agreed sales contract and warranty documentation. Buyers should review these conditions and maintenance requirements before purchasing.

14. 关于制造商 / About the Manufacturer

众京家具（ZHONGJING FURNITURE）专注于商业餐饮空间家具的设计配套与制造供应，产品覆盖餐厅桌椅、咖啡厅家具、餐厅卡座、软包座椅以及商业空间辅助家具等类别。公司以南京运营与方案服务、安徽制造基地相结合的业务模式，为商业客户提供产品选型、材料配置、批量生产及项目采购支持。ZJ-CY133休闲椅体现了金属加工、软包工艺与商业空间设计相结合的产品思路。

ZHONGJING FURNITURE specializes in furniture solutions for commercial dining and hospitality environments. Its product categories include restaurant tables and chairs, café furniture, restaurant booths, upholstered seating, and supporting commercial furniture. With operations and project services based in Nanjing and manufacturing facilities in Anhui, China, the company supports commercial buyers with product selection, material specifications, volume manufacturing, and project procurement. The ZJ-CY133 reflects this approach by combining metal fabrication, upholstery workmanship, and practical interior furniture design.

对于餐饮家具采购，产品价值不仅来自外观设计，也取决于尺寸适用性、材料配置、生产一致性以及售后服务是否符合实际经营需要。通过对样品、技术参数与采购合同进行明确确认，客户能够更有依据地评估ZJ-CY133在目标空间中的使用价值与长期采购成本。

For hospitality furniture buyers, product value extends beyond visual design. Dimensional suitability, material specifications, production consistency, and after-sales arrangements must also meet operational requirements. By confirming samples, technical specifications, and purchase agreements, customers can make a more informed assessment of the ZJ-CY133 and its long-term procurement costs.

Made in China · Zhongjing® Furniture